VGA multiplier
VGA multiplier
- Cost effective SOHO solution
- Enables the use of 2 monitors with one PC
- No software required
- Can also be used to attach a monitor far away from PC (up to 75 meters)
Features:
- Video Splitter is a VGA/SVGA splitting device which sends video signal of one PC to 2 monitors
- Its built-in 200 MHz bandwidth amplifier not only increases the transmission distance to about 75 meters but also improves quality of the video signal
Specifications:
- Power adapter: 9 VDC 500 mA
- Input Connectors: 1 HD DB15 Female
- Output Connectors: 2 HD DB15 Female
- Resolution: up to 2048x1536
- Maximum transmission distance: up to 250 feet (75 meters)
- Amplified signals:
a) Analogue: Red, Green, Blue video signals
b) TTL: Vertical and Horizontal synchronization signals - Case: Metal
- Power adapter
- Splitter
- Number of connected monitors: 2
- Sockets for connecting monitors: DB-15F x 2
- Sockets for connecting PC DB-15F x 1
- Housing material: metal
- Connecting a Plug-and-Play
- No software required
Requirements:
- PC with a graphics card VGA, SVGA, Multisync
- Monitor with HD plug-15M
- Cable connectors: VGA cable male-male
Availability: Low Stock
Dispatched within: 5-7 working days
USB 3.0 Metal HUB Charging - 7 Ports Power Supply/Charging
The METAL series is the latest line of i-tec products with a stylish appearance and exclusive packaging.
I-tec USB 3.0 Metal Charging HUB is an ideal addition for anyone who has an insufficient number of USB ports on their notebooks, ultrabooks or PCs and is constantly forced to connect and disconnect their favorite USB devices such as flash drives, Tablets, digital cameras, MP3 players, printers, etc.
HUB has 7 USB 3.0 ports with Plug & Play and USB charging - HUB automatically detects USB devices that need charging.
USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates.
The advantage is an external power supply that can be used to back up data on external hard drives or connect high power devices that are powered directly from the USB port.
HUB does not require driver installation. Simply connect the USB cable to your device and computer and start working immediately. The HUB has built-in overvoltage protection in the event of a short circuit on peripheral devices. This device is compatible with USB 2.0 / 1.1. Compact dimensions and light weight make the HUB a perfect accessory for people who use their laptop on the go.
- AC input 100-240 V, 50-60 Hz, 0.8A
- DC output 5 V, 4A
- Windows XP
- Windows Vista
- Windows 7 32 / 64bit
- Windows 8 32 / 64bit
- Windows 8.1 32 / 64bit
- Windows 10 32 / 64bit
- Mac OS X 10.x or higher
- I-tec USB 3.0 Metal Charging HUB 7 Port with built-in cable (28cm)
- power adapter (120cm cable)
- instruction
183 x 37 x 18mm.
- Baud rate up to 5 Gbps
- USB charging device detection system
- Plug & Play
- Overcurrent protection and overvoltage protection
- Led
Availability: Out of stock
Esperanza Gaming Notebook Cooling Pad Illuminated BREVA
Availability: Available
Dispatched within: 5-7 working days
i-tec USB-C Travel Easy Docking Station 4K HDMI
Availability: Low Stock
Dispatched within: 5-7 working days
Kensington® SmartFit® Easy Riser™ Laptop Cooling Stand, grey
Availability: Available
Dispatched within: 5-7 working days
Digitus 4-Port USB-C HUB + PD 4x USB 3.0, 1x PD Charging, silver
Availability: Available
Dispatched within: 5-7 working days
Gembird USB Docking Station for 2.5 and 3.5" SATA
Availability: Low Stock
Dispatched within: 5-7 working days
Esperanza Gaming Notebook Cooling EGB Illuminated
Availability: Available
Dispatched within: 5-7 working days
USB 3.0 Charging HUB 7 Port with Power Supply
Charging USB 3.0 HUB 7 port with power supply
i-tec USB 3.0 Charging HUB 7 Port + Power Adapter is the perfect accessory for anyone who has a notebook, ultrabook or PC with insufficient USB ports and is forced to constantly plug and unplug favorite USB devices.
HUB has 7 ports USB 3.0, Plug & Play and the possibility of charging by USB - HUB will automatically detect the connected USB devices that require charging.
- I-tec USB 3.0 HUB 7 Port
- USB 3.0 cable type A / B (90 cm)
- Power supply cable (115 cm)
133 x 60 x 27mm
- 7x USB 3.0 port for connecting USB devices, with 2x USB 3.0 port for charging according to the specifications of the USB-IF (BC 1.2)
- 1x USB 3.0 cable to connect the HUB to a notebook / PC
- Transmission speed up to 5 Gbps
- Plug & Play
- Overcurrent and overvoltage
- Led
- Power supply: input AC 100-240V, 50-60Hz, 1.0A; output DC 12V, 2A
Availability: Low Stock
Dispatched within: 5-7 working days
Digitus Splitter PoE + Injector 802.3at 24W
Availability: Low Stock
Dispatched within: 5-7 working days