Accessories

VGA multiplier

• Cost effective SOHO solution
• Enables the use of 2 monitors with one PC
• No software required
• Can also be used to attach a monitor far away from PC (up to 75 meters)

Features:
- Video Splitter is a VGA/SVGA splitting device which sends video signal of one PC to 2 monitors 
- Its built-in 200 MHz bandwidth amplifier not only increases the transmission distance to about 75 meters but also improves quality of the video signal

Specifications:

• Power adapter: 9 VDC 500 mA 
• Input Connectors: 1 HD DB15 Female 
• Output Connectors: 2 HD DB15 Female 
• Resolution: up to 2048x1536 
• Maximum transmission distance: up to 250 feet (75 meters) 
• Amplified signals: 
  a) Analogue: Red, Green, Blue video signals
  b) TTL: Vertical and Horizontal synchronization signals
• Case: Metal

- Power adapter
- Splitter

- Number of connected monitors: 2
- Sockets for connecting monitors: DB-15F x 2
- Sockets for connecting PC DB-15F x 1
- Housing material: metal
- Connecting a Plug-and-Play
- No software required
Requirements:
- PC with a graphics card VGA, SVGA, Multisync
- Monitor with HD plug-15M
- Cable connectors: VGA cable male-male

110 x 30 x 10mm

Is your current notebook, tablet or smartphone equipped with a single USB-C or Thunderbolt 3 port, and you would like to use several USB peripherals at the same time?
Are you forced to constantly connect and disconnect your favorite devices due to the lack of USB ports? Thanks to this HUB you can get another 4 standard USB 3.0 ports. Connect an external keyboard and mouse, transfer data or videos from an external USB memory stick at up to 5 Gbps or recharge other mobile devices.

HUB does not require installation of drivers. Just connect it with a USB-C cable and it's ready to use right away.
It has built-in overcurrent protection to protect your computer in case of a short circuit in connected peripheral devices. The interface is compatible with USB 2.0. Thanks to its small dimensions and light weight, you can take it with you wherever you like. HUB is suitable for use with Apple MacBook 2015 computers, Chromebook Pixel 2015, Acer Switch Alpha 12, Dell XPS 13, HP EliteBook Folio G1 and other devices with USB-C interface. The USB-C connector has many advantages - it is smaller, symmetrical and allows easy connection, because you do not have to worry about turning the connector into the right position.

- i-tec USB-C 3.1 Metal HUB 4 with integrated USB-C cable (20cm)
- User manual

96 x 30 x 21mm

- USB charging detection mechanism for mobile devices
- Plug & Play function
- Led
- Overcurrent and overload protection
- Powered by USB bus, power supply is not needed

Combination of passive HUB features with Gigabit Ethernet adapter.

This device lets you quickly and easily connect USB accessories to your notebook, tablet, PC with the new USB-C or Thunderbolt 3 connector, and instant access to your network and the Internet through Gigabit Ethernet. HUB has 3 USB 3.0 ports with Plug & Play capability and USB charging - HUB automatically detects devices connected via a USB port that require charging. USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates.

Gigabit Ethernet port offering fast 10/100/1000 Mbps network access. The advantage is fast internet without interruption.

The HUB is powered by a USB bus and has built-in overvoltage protection in case of a short circuit on peripheral devices. It is compatible with many systems from Windows, Mac OS to Linux. You can also use the Ethernet network connection on Android. However, this option must be provided by the manufacturer of your Android device. Availability of the function can be checked: Network connection settings → Other networks (Ethernet). HUB is compatible with the MacBook Pro 2016, MacBook 2015, Chromebook Pixel 2015, Acer Switch Alpha 12, Dell XPS 13, HP EliteBook Folio G1, ASUS UX390UAK and other devices with a new USB-C port.

I-tec USB-C Metal Hub 3 Port + Gigabit Ethernet Adapter with cable (28cm)

96 x 30 x 21mm

- Ethernet connection status LED
- Wake-on-LAN and Plug & Play
- Realtek 0411 Chipset - USB 3.0 HUB
- Realtek 8153 Chipset - USB 3.0 to Gigabit Ethernet - Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3a (Energy Efficient Ethernet)
- Power over USB-C cable, no external power supply required

USB 3.0 Slim PASS 4 passive Win / MAC ports
The i-tec USB 3.0 HUB is a perfect addition for anyone who has an insufficient number of USB ports on their notebooks, ultrabooks or PCs, and is constantly forced to connect and disconnect their favorite USB devices such as flash drives, mobile phones, tablets, Digital cameras, MP3 players, printers, etc. HUB has 4 USB 3.0 ports with Plug & Play capability and USB charging - HUB automatically detects USB devices that need charging. USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates. The LED indicates read and write status.

HUB is powered by USB and does not require driver installation.
Simply connect the USB cable to your device and computer and start working immediately. The HUB has built-in overvoltage protection in the event of a short circuit on peripheral devices. The device is compatible with USB 2.0. The HUB is supplied without a power supply that is not required for use with most devices.
Compact dimensions and light weight make the HUB a perfect accessory for people who use their laptop on the go.

Plug & Play

- Windows XP
- Windows Vista
- Windows 7 32 / 64bit
- Windows 8 32 / 64bit
- Windows 8.1 32 / 64bit
- Windows 10 32 / 64bit
- Mac OS X 10.x or higher

- i-tec USB 3.0 passive 4-port HUB with built-in cable (20cm)
- instruction

110 x 30 x 10mm

- Led
- Overcurrent protection and overvoltage protection

The METAL series is the latest line of i-tec products with a stylish appearance and exclusive packaging.
I-tec USB 3.0 Metal Charging HUB is an ideal addition for anyone who has an insufficient number of USB ports on their notebooks, ultrabooks or PCs and is constantly forced to connect and disconnect their favorite USB devices such as flash drives, Tablets, digital cameras, MP3 players, printers, etc.

HUB has 7 USB 3.0 ports with Plug & Play and USB charging - HUB automatically detects USB devices that need charging.
USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates.
The advantage is an external power supply that can be used to back up data on external hard drives or connect high power devices that are powered directly from the USB port.
HUB does not require driver installation. Simply connect the USB cable to your device and computer and start working immediately. The HUB has built-in overvoltage protection in the event of a short circuit on peripheral devices. This device is compatible with USB 2.0 / 1.1. Compact dimensions and light weight make the HUB a perfect accessory for people who use their laptop on the go.

- AC input 100-240 V, 50-60 Hz, 0.8A
- DC output 5 V, 4A

- Windows XP
- Windows Vista
- Windows 7 32 / 64bit
- Windows 8 32 / 64bit
- Windows 8.1 32 / 64bit
- Windows 10 32 / 64bit
- Mac OS X 10.x or higher

- I-tec USB 3.0 Metal Charging HUB 7 Port with built-in cable (28cm)
- power adapter (120cm cable)
- instruction

183 x 37 x 18mm.

- Baud rate up to 5 Gbps
- USB charging device detection system
- Plug & Play
- Overcurrent protection and overvoltage protection
- Led

The METAL series is the latest line of i-tec products with a stylish appearance and exclusive packaging.
I-tec USB 3.0 Metal Charging HUB is an ideal addition for anyone who has an insufficient number of USB ports on their notebooks, ultrabooks or PCs and is constantly forced to connect and disconnect their favorite USB devices such as flash drives, Tablets, digital cameras, MP3 players, printers, etc.

HUB has 4 USB 3.0 ports with Plug & Play and USB charging - HUB automatically detects USB devices that need charging.
USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates.
The advantage is an external power supply that can be used to back up data on external hard drives or connect high power devices that are powered directly from the USB port.
HUB does not require driver installation. Simply connect the USB cable to your device and computer and start working immediately. The HUB has built-in overvoltage protection in the event of a short circuit on peripheral devices. This device is compatible with USB 2.0 / 1.1. Compact dimensions and light weight make the HUB a perfect accessory for people who use their laptop on the go.

- AC input 100-240V, 50-60 Hz, 0.8A
- DC output 5V, 2A

- Windows XP
- Windows Vista
- Windows 7 32 / 64bit
- Windows 8 32 / 64bit
- Windows 8.1 32 / 64bit
- Windows 10 32 / 64bit
- Mac OS X 10.x or higher

- I-tec USB 3.0 Metal Charging HUB 4 Port with built-in cable (28cm)
- Power adapter (120cm cable)
- Instruction

112 x 37 x 18mm.

- Baud rate up to 5 Gbps
- USB charging device detection system
- Plug & Play
- Overcurrent protection and overvoltage protection
- Led

USB 3.0 Metal 4-port passive USB HUB, 4x USB 3.0 port
i-tec USB 3.0 HUB is the perfect companion for everyone who does not have enough USB ports in their notebook, ultrabook or PC, and for those who have to constantly disconnect and connect their favorite devices, such as a USB flash drive, tablet, digital camera, MP3 player, printer, etc.

This HUB offers 4 USB 3.0 ports with Plug & Play function and standard USB charging - HUB will automatically detect connected USB charging devices.
The USB 3.0 interface is mainly important when transferring data from USB 3.0 memory cards and flash drives that use the highest transfer speed. The LED indicates the read and write status of the data. HUB is powered from the USB bus and does not require installation of drivers. Just connect it with a USB-C cable and it's ready to use right away. It has built-in overcurrent protection to protect your computer in case of a short circuit in connected peripheral devices. The interface is compatible with USB 2.0, works without a power supply, which is not required for most equipment, and thanks to its small size and light weight, you can take it with you wherever you like.

- i-tec USB 3.0 Metal 4-port HUB passive with built-in USB cable (20cm)
- User's guide

96 x 30 x 21mm

- USB charging detection mechanism for mobile devices
- Plug & Play function
- Led
- Overcurrent and overload protection
- 1x built-in USB 3.0 cable for connecting the HUB to a notebook, tablet or computer

Combination of passive HUB features with a Gigabit Ethernet adapter.
This device allows you to quickly and easily connect USB accessories to your notebook, tablet, PC, and instantly access your network and the Internet through Gigabit Ethernet. HUB has 3 USB 3.0 ports with Plug & Play capability and USB charging - HUB automatically detects devices connected via a USB port that require charging. USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates.

Gigabit Ethernet port offering fast 10/100/1000 Mbps network access.
The advantage is fast internet without interruption. The HUB is powered by a USB bus and has built-in overvoltage protection in case of a short circuit on peripheral devices. It is compatible with many systems from Windows, Mac OS to Linux. You can also use the Ethernet network connection on Android. However, this option must be provided by the manufacturer of your Android device. Availability of the function can be checked Network connection settings → Other networks (must be Ethernet).

- I-tec USB 3.0 Hub HUB 3 Port + Gigabit Ethernet Adapter with cable (28cm)
- Quick Start

96 x 30 x 21mm

- Fast Ethernet and Internet access via Gigabit Ethernet, 1x Ethernet port. GLAN RJ-45 supports 10/100/1000 Mbps speed.
- 3x USB 3.0 port to connect USB devices and fast data transfer (5 Gbps)
- Ethernet connection status LED
- Wake-on-LAN and Plug & Play
- Realtek 0411 Chipset - USB 3.0 HUB
- Realtek 8153 Chipset - USB 3.0 to Gigabit Ethernet - Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3a (Energy Efficient Ethernet)